From chumba@hispeed.ch Tue Mar 11 20:09:04 2003 Date: Tue, 11 Mar 2003 14:08:17 +0100 From: Mete Ciragan To: Ian Cowburn Subject: MilkShape 3D Registration [ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] Hello Ian Cowburn, thank you for registering MilkShape 3D. To install the code, please choose the menu 'Help|About' and press the 'Register' button. Copy (Ctrl+C) and paste (Ctrl+V) both the name and 3 code parts into the appropriate editboxes so that it looks like: [Ian Cowburn] [3Cd3A]-[38d39d]-[24dMN2C] If you enter the code after MilkShape 3D has expired, then let MilkShape 3D close, restart it, click the 2 minutes warning away and wait 2-3 minutes. Then close MilkShape 3D again and it is registered. Since you are a registered user now, you will get this in addition: * free upgrades on the MilkShape 3D 1.x.x series * discounts on new software by chUmbaLum sOft If you have further questions about MilkShape 3D, feel free to visit the: * official forum: http://www.swissquake.ch/chumbalum-soft/forum * private forum: http://www.network54.com/Forum/72273 Best Regards, Mete Ciragan --- mete@swissquake.ch http://www.swissquake.ch/chumbalum-soft/