# Tagtrak Gateway Configuration file for the CUBES
# Primary Link.
# SC 16/12/97

#The following lines are for cubes connection

# file to remember address stamps used by the Cubes
#  default is /shared/tagtrak/etc/AST.Conf1
# Address_Stamp_Filename	/ultratrak/dornier/etc/AST.ConfCUBES_Sec

BSI_server_port_address	6050
BSI_server_host_name	tagtrk04

#The error logging level is three HEX characters, the first HEX character
#is the logging level for the tx side, the second HEX character
#is for the rx side and the third HEX character is general information
#messages. 
#ie 975, Tx=9, Rx=7, Gen=5
error_message_logging	999
error_message_filename	/shared/tagtrak/log/CUBES2_Messages

#The password to be sent to login to CUBES
password			LOGIN003

#The version number of the TCP/IP header
version				2

#The Application Identification
App_id				LHRBS101

#The size of the Receive Circular Buffer
Rx_Circ_Buff_Size	16

#The redo log file to contain received BSMs
Redo_Log_Filename	CUBES2_REDO

#The size of the Transmitt Circular Buffer
Tx_Circ_Buff_Size	30

#When a Data Off message has been sent and the receive buffer
#becomes less than x% full a Data On message is transmitted
Data_On_Watermark	20

#When the receive buffer becomes x% full then a Data Off message
#is transmitted
Data_Off_Watermark	80

#If no message is received from the CUBES connection for this
#time then it is assumed that the connection is down
Msg_Recv_Timeout	1000

#The status message timeout period. If no message is
#sent for this time then a status message is transmitted
Msg_Send_Timeout	10

#The Message Acknowledgement timeout period
Msg_Ack_Timeout		5

#The Check for Lost Message signal timeout period
No_Msg_Sent_Timeout		60

#The timeout for unexpected ack
Unexpected_Ack_Timeout		2

#The time between login Attempts, this should be greater than ten seconds
#so that the system is no loaded
Login_Timeout	20

#The time between connection attempts
time_between_attempts	10